图片展示

Attention in the installation of slip ring

作者:Emma 浏览: 发表时间:2021-06-18 12:25:18 来源:CENO Electronics



1, Replacement of the slip ring should be replaced as soon as possible, in the wear to the original height of two thirds of the time will need to replace the new slip ring, and a replacement of all the slip ring, the specifications should be the same as the previous slip ring, especially in a motor is not allowed to appear different specifications of the slip ring.


 

2, Slip ring in the installation to ensure enough space, the control of the inner wall clearance should be moderate, so as to avoid the slip ring operation is not stable, and the converter should also leave enough distance, the distance is too small or too much easy to cause damage.


 

3, The protection of the oxide film should be maintained when the slip ring is maintained, and the wear of the brush on the commutator.Most of this is because the oxide film is too thick and increases the voltage, causing the machine to overheat and cause additional wear.But too thin oxide film will damage the brush, and easy to form a spark cause mechanical short circuit.Therefore, the brush is equipped with lubrication performance is also an important ring in the maintenance of slip ring.


 

4, When the slip ring ellipse is too high, turning and other cleaning should be carried out to prevent chatter, resulting in serious wear and short circuit of the brush.


CENO Electronics Technology Co., Ltd

CONTACT US


Add:3F,Bldg B,Xin jian xing industrial park,Guangming Dist,Shenzhen,518107,Guangdong,China

Tel: +86 (755)2342 0945

Fax: +86 (755)2342 0749

E-mail:xp@cenoslipring.com

Skype: slipring360

Web: www.cenoslipring.com   www.ceno360.com


CENO Electronics Technology Co., Ltd

Technical support:Hisonyun    Server support:Tencent enterprise post

添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了