图片展示

CENO’s slip ring in gantry crane

作者:Emma 浏览: 发表时间:2021-06-21 20:00:00 来源:CENO Electronics

At present, in many construction sites, due to various reasons, the soft foundation can not be completely replaced.The gantry crane track and its foundation installed on soft foundation are easy to be deformed. When the gantry crane is in operation, the connection between the gantry crane and the receiving electric appliance is easily damaged on the track with slight deformation, which causes the sliding wire to burn out and other safety accidents, so that the gantry crane cannot be operated.There are many problems in connecting the gantry crane with the receiver by fixed connection devices such as Angle iron.


 

CENO provides a soft slip ring for sliding wires in gantry cranes. It addresses the technical shortcomings of the gantry crane by using a soft connection that allows the crane to operate smoothly on soft foundations without damaging the sliding wires, eliminating safety risks.In order to achieve the above purpose, through the following technical solutions to realize the gantry crane sliding wire soft connector, including sliding ring fixed rod, sliding ring fixed rod is installed on the gantry crane, sliding ring fixed rod is installed on the sliding ring, steel wire rope is installed on the sliding ring, the other end of the wire rope and the electrical receiving device installed on the electrical receiving track connected.The advantage is that the soft connection mode is used to connect the gantry crane and the actuator, in which the slip ring can move laterally on the slip ring fixed rod, so as to overcome the deformation of the gantry crane track, and the steel wire rope is used to connect the gantry crane and the actuator, the steel wire rope can adjust the position of the receiver up and down to make it in good contact with the sliding wire.The above arrangement makes the gantry crane can operate freely on soft foundation without damaging the sliding wire, eliminating the hidden danger of safety and saving a lot of manpower and materials;The structure is simple and reasonable, and the production cost is low.


CENO Electronics Technology Co., Ltd

CONTACT US


Add:3F,Bldg B,Xin jian xing industrial park,Guangming Dist,Shenzhen,518107,Guangdong,China

Tel: +86 (755)2342 0945

Fax: +86 (755)2342 0749

E-mail:xp@cenoslipring.com

Skype: slipring360

Web: www.cenoslipring.com   www.ceno360.com


CENO Electronics Technology Co., Ltd

Technical support:Hisonyun    Server support:Tencent enterprise post

添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了