图片展示

Maintenance method for multi - channel slip ring

作者:Emma 浏览: 发表时间:2021-09-19 17:32:05 来源:CENO Electronics

Rotary joint is a kind of special rotary joint for low speed and high pressure multi-medium and multi-channel equipment,which is used for machining center turntable,hydraulic work station, coiler mandrel,converter,large packaging turntable,hydraulic machinery,multi-channel high pressure controller and other equipment.

 

There are two types of multi-channel rotary joints: side thread connection and front thread connection.The two joint series can transport gas, vacuum, water, coolant and steam at the same time. They can be used in a mixture without interference.

 

In order to extend the service life of the multi-channel rotary joint, we need to carry out daily maintenance, which requires the following aspects:

 

1. Keep the rotary joint roller and the inside of the pipe clean. Pay attention to new equipment and add filters if necessary to prevent abnormal wear of the rotary joint caused by foreign matter.

2. If the machine is not used for a long time, it will lead to scaling and rust of multi-channel rotary joints.Pay attention to clogging or dripping when used repeatedly.

3. Please use the oil holder to oil regularly, so that the rotary joint bearing can operate normally.

4. Rotating joints of circulating heat media should be heated gradually and the temperature should not change rapidly.

5. Check the wear condition and thickness change of the sealing surface, observe the friction track of the sealing surface, and see whether there is three-point discontinuity or scratch, etc.If this is the case, please replace it.

6. Swivel joints should be handled with care. Collision is strictly prohibited to avoid loss of joint components.

7. Foreign matter is strictly prohibited to enter the rotary joint.

8. Do not leave the multi-channel rotary joint idle for a long time. Do not use regular oil injection for a long time to prevent rust.


CENO Electronics Technology Co., Ltd

CONTACT US


Add:3F,Bldg B,Xin jian xing industrial park,Guangming Dist,Shenzhen,518107,Guangdong,China

Tel: +86 (755)2342 0945

Fax: +86 (755)2342 0749

E-mail:xp@cenoslipring.com

Skype: slipring360

Web: www.cenoslipring.com   www.ceno360.com


CENO Electronics Technology Co., Ltd

Technical support:Hisonyun    Server support:Tencent enterprise post

添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了